Blog Article

MAS Epoxies available at Rockler Woodworking and Hardware


DIY and professional woodworkers alike have loved MAS Epoxies specialty woodworking products since our launch. Our easy to use product line offers everything needed from start to finish on any type of woodworking project.

Penetrating Epoxy Sealer





MAS Epoxies Penetrating Epoxy Sealer is an easy two part system developed to penetrate soft, rot damaged wood, while restoring strength and structure to create a solid base. Coat new wood and damaged areas creating a 100% waterproof sound base for paint and additional repairs. Available in 1.5 pint and 1.5 quart kits.

2:1 mix ratio by volume

100A:43B mix ratio by weight

25-30 min gel time at 75°F

10-12 hrs tack free at 75°F

May be diluted with up to an equal volume of solvent

100% solids solvent free formula means no VOC

Deep Pour and Table Top compatible seal coat

Designed to reinforce and restructure wood

Deep Pour Epoxy



MAS Deep Pour Epoxy Resin System is a 100% solid, two-component, three to one by volume mix ratio formulated for deep pour casting, encapsulating and molding applications. It cures within 24 hours at 70 ̊F creating a clear, glass like finish that resists scratching and yellowing with an extended gel time to minimize exotherm and improved air release. Available in 1.3 Qt, 1.3 Gallon and 4 Gallon kits.

3:1 mix ratio by volume

100A:28B mix ratio by weight

24 hour cure time at 70F

Do Not Use above 75F

100% solid for casting, encapsulating and molding projects

Add liquid dye or pigment powder for river table pours

Prior to pouring, wood must be dry and sealed with epoxy

Max casting thickness 1” at 70°F

DO NOT pour over 80°F. Temperatures will effect curing process that can result in cracks, yellowing and shrinking

Table Top Pro Epoxy




MAS Table Top Pro Epoxy Resin System is a 100% solid, two-component, 1:1 ratio by volume, room temperature curing epoxy resin system for clear coating surfaces. It cures to a clear, glass like finish that resists scratching and yellowing. This easy to use system should be poured no more than 1/8” at a time.

1:1 Mix ratio by volume

100A:83B mix ratio by weight

30 min gel time at 70F

Self-leveling epoxy system

Glass like finish

Compatible with colored ink and powder additives

1/4″ maximum depth of pour

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.