Art Pro Epoxy
$79.00$189.00 Select options

Art Pro Epoxy

$79.00$189.00

Art Pro has been called the best epoxy resin for art with its low viscosity, 1:1 mix ratio, long 60 minute working time and improved UV resistance. It was developed with the input of dozens of makers, artists and woodworkers who wanted the best resin for art yet still could serve as a functional piece.

(1 customer review)
Clear

Description

Art Pro is an easy to use, low viscosity system art epoxy that provides an extended working time that allows users to create beautiful, high gloss pieces of art resin. For use with pigment powders, alcohol ink and acrylic paints to create a wide range of stunning resin art.

Features and Benefits:

  • 1:1 mix ratio by volume
  • 60 min working time at 75˚F
  • Improved UV stability
  • Great flow for color blending

How much will I need?

Loading...
What are the dimensions of your project?
Here is the amount of epoxy resin you will need

Resources

Safety Data Sheets & Technical Data

MAS Art Pro Resin

MAS Art Pro Hardener

Technical Data Bulletin

FAQ

Questions and answers of the customers

  1. 0 votes
    Q Can this be poured in a two part mold
    Asked by Josh warden on October 27, 2020 4:01 pm
    There are no answers for this question yet. Answer now
  2. 0 votes
    Answered by the admin

    You can  work in a well ventilated space or wear a National Institute for Occupational Safety and Health (NIOSH) approved respirator equipped with an organic vapors cartridge. 

  3. 0 votes
    Q Is it safe to use the Art Pro Epoxy on cheeseboards? answer now
    Asked by Nataly K. on September 16, 2020 2:00 pm
    Answered by the admin

    Art Pro is fine for incidental food contact, like dropping and picking up, but we do not recommend using any epoxy on surfaces that will have direct continuous food contact. 

  4. 0 votes
    Q After the last sanding can you use polyurethane as the final finish coat? answer now
    Asked by Steve Caroenter on September 12, 2020 8:49 am
    Answered by the admin Hello! Yes, you can use polyurethane as the final finish coat after sanding. If the project is going outdoors we recommend using a high-quality marine grade spar varnish with UV protection or 2-part Urethane like Bristol Finish. Typically 4-6 coats will suffice. Although ArtPro has UV stabilizers, all epoxy resin will degrade in direct continuous exposure to sunlight. The urethanes will add additional protection and prolong the life of your project!
  5. 0 votes
    Answered by the admin

    We would recommend using Tabletop Pro which rated at 124F . Art Pro has a Heat Deflection Temperature of 110F which is fine for cold beverages but anything hot could leave an indentation ie. cup ring. If you do get heat indents from warm objects you can use a heat gun to warm the area and smooth out the dent. General rule of thumb with any brand of room temperature epoxy, if it is hot enough to burn you, it can leave and indent on the epoxy! 

Send me a notification for each new answer.

1 review for Art Pro Epoxy

  1. Hailey Nolin

    This is my go-to for my top coat finish! I love how I can take my time with it since it’s working time is extended, and I also love that is UV resistant! Highly recommend ArtPro if you’re a resin artist.

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.