We can help you if you have ever experienced incomplete curing from other penetrating epoxy systems. Our MAS Epoxies Penetrating Epoxy Sealer is solvent free (100% solids) so you know you are going to get penetrating power and a complete cure. It also means that our Penetrating Epoxy is VOC-Free, which brings our customers peace of mind. A resin sealer like our Penetrating Epoxy System is ideal for repairs because of their strength and waterproofing characteristics. If you need a resin wood sealer that has great penetrating power look no further.
Packaged solvent-free epoxy sealer so you can use it without concerns of VOCs
Excellent penetrating power without adding your own solvent
Seals gaps and strengthens areas in rotten wood that are not visible externally
Excellent for:
Window sills
Deck repair
Door frames
Transom reinforcement
And anywhere else you would like to restore rotten wood
MAS Epoxies designed Penetrating Epoxy Sealer to strengthen soft wood. This product is unique in that it does not contain any solvent, which means you are buying 100% solids. It also means that you do not have to worry about volatile organic compounds (VOCs) when working with our PES. Customers have used this product to reinforce canoes, repair window sills and fix wood rot. Try it for your next project and see why MAS products are great for beginners and loved by professionals.
Erik Curtis used MAS Penetrating Epoxy to stabilize insect damage and create a sculpture!
You want to try to remove the soft of sticky portions. Use denatured alcohol or acetone and check out the troubleshooting section at the top of the page there's an article that explains your exact situation. The article is titled "How to remove soft or sticky resin"
Asked by Robert Baker on December 30, 2020 6:53 pm
Answered by the admin
You could certainly use it for that, you'd need 2-4 coats or until you reach uniform coverage. Keep in mind epoxy degrades in UV light so you will to paint it or cover it with a high quality spar varnish for UV protection.
Asked by William Olson on December 22, 2020 11:23 am
Answered by the admin
Typically you would want to use a water-based stain when using epoxy. If the oil-based stain is already applied, you will need to wait for it fully dry (check with the stain manufacturer for a timetable) then you can apply a thin seal coat. You may experience orange peel or fish eyes in the seal coat, if so, wait for it to cure, sand to knock down any deviations, liberally wipe the surface with denature alcohol or acetone then apply another seal coat.
You could use penetrating epoxy to seal them. Depending on the volume you could use Deep Pour to fill them, the smaller the volume the longer the epoxy will take to cure though. Oil top dressings can be applied to epoxy
Asked by Charles Phipps on December 15, 2020 9:23 am
Answered by the admin
Acetone and Denatured alcohol are solvents for epoxy resin, you would mix part A and B together then add the solvent. Environmentals like air temp, material temp and humidity will play a factor in the cure time. The coverage is entirely depending on the porosity of the material you are applying it to. Absorption on punky wood will be much greater and will require more material then applications on closed grain wood or dense hardwoods.
Asked by Debra I Craig on November 5, 2020 12:33 am
Answered by the admin
It depends on the air temperature, the warmer it is the faster it will setup. You would likely need around 24 hours before it's hardened to a point it can be turned over.
Asked by Brian A. Castle on October 7, 2020 7:19 am
Answered by the admin
If you can no longer make a fingernail impression in the PES then you will need to scuff it up with sandpaper then wipe it down with denatured alcohol or acetone. If its still soft enough to dent with a fingernail, you can pour the deep pour without sanding.
Alex –
Excellent for any ttt try or of wood.