Mixing Cups
$4.36$14.19 Select options

Mixing Cups

$4.36$14.19

Whether you need to mix an ounce of epoxy or a quart, we offer epoxy mixing cups that will work for you. We have small 1 oz. and 2 oz. epoxy cups for small batches of epoxy as well as larger 8 oz., 16 oz. and 32 oz. cups for mixing needs. The larger size resin mixing cups offer the 2:1 mixing marks and volumetric markers (8 oz., 16 oz. and 32 oz.).

(1 customer review)
Clear

FAQ

Questions and answers of the customers

  1. 0 votes
    Q How do you dispose of trace resin in cup? I can't imagine it is safe to rinse down the sink?... Read more answer now
    Asked by Cnidy on February 15, 2021 6:18 pm
    Answered by the admin

    You would dampen a cloth or rag with denatured alcohol and wipe the cup out. 

  2. 0 votes
    Q I was wondering, are the measurements accurate? I’ve bought similar ones online that were not and...... Read more answer now
    Asked by taly on January 30, 2021 2:20 am
    Answered by the admin

    Pre-marked measuring cups are accurate to an extend however measuring by weight is the must effective means to calculate proper ratios. 

  3. 0 votes
    Q Is this safe for food contact? Also, what is the heat resistance, and working time?... Read more answer now
    Asked by Sarah on January 24, 2021 9:31 pm
    Answered by the admin

    Our mixing cups are well suited for food contact, unfortunately we've never measured the heat resistance of them nor determined a working time

  4. 0 votes
    Q Are these cups reusable?... Read more answer now
    Asked by Daiana on January 17, 2021 4:40 am
    Answered by the admin

    The cups can be reused! You will want to turn them over while the epoxy is still liquid, place the stir stick or popsicle stick under one side to tilt the cup. Once the epoxy cures, 24-36 hours you can gently squeeze and wiggle the popsicle stick and the entire mass should demold easily. If it doesn't seem to budge, let it cure a bit longer. 

  5. 0 votes
    Q When mixing in a 3:1 ratio in a mas measuring cup, if you want to use 3 parts resin where do you ...... Read more answer now
    Asked by Larry Reynolds on December 28, 2020 2:49 pm
    Answered by the admin

    If it has a 3:1 ratio printed on the cup. You would match the numbers on both sides. So if you filled it to 5 on side 3 you would fill it the 5 mark on side 1 

    https://masepoxies.com/easiest-way-to-measure-epoxy-by-volume/

  6. 0 votes
    Q Hi I bought a pack of 16 oz cups based on your response above, but they only have a 2:1 ratio and...... Read more answer now
    Asked by Cole on October 29, 2020 6:45 pm
    Answered by the admin

    You can email customer service at info@masepoxies.com to exchange

  7. 0 votes
    Q MAS used to have mixing cups that had 3:1 and other ratio markers not just 2:1. However, you sell...... Read more answer now
    Asked by Jim on September 10, 2020 3:30 pm
    Answered by the admin Hello! The mixing cups do have the 1:1 2:1 and 3:1 markings on them!

Send me a notification for each new answer.

1 review for Mixing Cups

  1. Alexandra Slaine (verified owner)

    So handy esp if you want to cut down on studio waste!

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.